RESIN PROPERTIES
Resin Properties
Plastic materials are susceptible to temperature and humidity change as compared to metals. In a special testing room with a controlled temperature of 23℃±2℃ and relative humidity of 50%±5% to accommodate high-accuracy static and thermal property testing, we conduct wide range of plastic material testing to ISO, ASTM, JIS and other standards including static and thermal property testing.
Tensile test with contactless extensometer
Tensile strength chart
Thermal mechanical analysis chart
Load deflection temperature chart
Expertise
tatic properties testing
| Tensile test | 10kN, 1kN |
|---|---|
| High/low temperature tensile test | 50kN: -60℃〜250℃ 100kN: -180℃〜320℃ |
| Charpy impact test | 0.5J〜15J |
| Izod impact test | 1J〜22J |
| Rockwell hardness test | HRR, HRL, HRM |
| Shore hardness test | HDD, HDA |
| Tensile modulus test | |
| Density measurement test | |
| Bend test |
Temperature characteristics
| Brittleness temperature test | -50℃〜20℃ |
|---|---|
| Load deflecting temperature test | Max 300℃ |
| Melt flow rate test | |
| Vicat softening temperature test | |
| Thermomechanical analysis test |
Standards
Tensile test
| JIS K 7161,7162:1994 |
| ISO 527-1,2:1993 |
| ASTM D638 |
Thermomechanical test
| JIS K 7197 |
| ISO 11359-1,2 |
Izod
Impact test
| JIS K 7110 |
| ISO 180 |
Bending test
| JIS K 7171 |
| ISO 178:2001 |
| ASTM D790 |
Charpy impact test
| JIS K 7111-1 |
| ISO 179-1 |
TEST SERVICE
Test Service
KMTL provides a wide range of testing services including fatigue and creep testing to support safety and security for society at large.